M.A.International
Girgaon, Mumbai, Maharashtra
SEND SMS
SEND EMAIL
Product Details:
| Material | Stainless Steel |
| Size (inch) | 1/2, >3, 2, Upto 48 Inch, 3/4, 1, 3 |
| Unit Length (meters) | 3 , 6 |
| Surface Finish | Sand Blasted, Mill Finished, Brushed, Finished Polished |
| Pipe Fluid | Chemical, Slurry, Gas, Steam, Water |
| Type | Seamless, Welded |
| Material Grade | SS316, SS316L, SS304 |
| Condition | New |
| Customised | Yes |
| Shape | Square, Rectangular, Round |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Size (inch) | 1, 3/4, 2, 3, >3, 1/2 |
| Unit Length (meters) | 6, 3 |
| Surface Finish | Sand Blasted, Brushed, Finished Polished, Mill Finished, Anodized |
| Pipe Fluid | Steam, Water, Chemical, Gas |
| Type | Seamless, Welded |
| Condition | New |
| Shape | Rectangular, Square, Round |
| Material Grade | SS316L, SS204, SS304, SS316 |
Manufacturers, Exporters & Supplier of Stainless Steel Seamless Pipe.
ASTM A312 Stainless Steel Welded Pipe Stockist, Supplier & Exporter.
We at M.A.International are importer, exporter and supplier of ASTM A312 Stainless Steel Pipe. These sheet are manufactured using superiors quality raw materials for smooth manufacturing of the SS Pipe.
These SS Pipe are exporter to GCC Countries, Europe & African countries.
Also the demand for the these Stainless Steel Pipe is increasing with a rapid pace as the materials has flexible manufacturing capabilities.
Also these Stainless Steel Pipe supplied in standard as well as in cut lengths as per customers requirements.
Our SS Pipe meet all the necessary international accredition, hence they accepted worldwide.
All ASTM A312 Stainless Steel Pipe are dispatched with Mill Test Certificate or Chemical Test Certificate from NABL Approved Laboratory.
We also offer third part inspection from any inspection agency for the TPI of these Stainless Steel Pipe.
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Material | Stainless Steel |
| Nominal Size | 1/2 inch, 3 inch, Upto 16 Inch, 2 inch, 3/4 inch, >3 inch, 1 inch |
| Length | 6m, 3m |
| Unit Length | 6 m |
| Surface Finish | Sand Blasted, Mill Finished |
| Hollow Sections | Square, Circular |
| Type | Seamless, Welded |
| Material Grade | SS316, SS316L, SS304, SS304L |
| Pipe Fluid | Gas, Water, Chemical |
| Condition | New |
| Shape | Square, Round, Rectangular |
We are well-known as the leading exporter and supplier of premium-quality SS Seamless Pipes. They are made in compliance with industrial quality standards at our ultramodern infrastructure facility and are renowned for their superior sturdiness. These long-lasting pipes have a robust construction which makes them resistant to impacts and dents. These dimensionally accurate pipes can be easily installed anywhere without any hassles. They have low maintenance requirements. They are corrosion-proof and moisture-repellent. They do not get damaged despite repeated contact with water and are highly demanded by various industries for the same reason. Our supply network extends far and wide and helps our clients access our products easily at affordable rates. We also export them to our overseas clients through hassle-free shipment modes. They are available at budget-friendly rates.
Technical Data:
Grade : ASTM A312 TP 304,316,321,317,347,304L,304H,316L,316TI etc.
Size : 1/2" NB TO 16" NB
Thickness : From Sch 10 to Sch XXS
Length : 5 to 7 Meters Long or 10 - 12 Meters Long
Type : Seamless
Forms : Round, Rectangle, Square, Oval.
Features:
Long-lasting
Rust-resistant
Easy to install
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Piece |
| Material Grade | SS304L, SS316L, SS304, SS316 |
| Size | 1, 3/4, 1/2, Upto 48 Inch, 2, 3 |
| Application | Gas Pipe, Structure Pipe, Hydraulic Pipe, Chemical Fertilizer Pipe |
| Material | Stainless Steel |
| Product Type | Welded, Fabricated, Seamless |
| Condition | New |
Standards: ASTM A403 / ASTM A182
Grades: 304 , 304L , 316L, 316, 347, 317, 317L, 310, 310S, 304H, 316H etc...
Type: Seamless / Welded
Formations:
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Piece |
| Material | Steel |
| Condition | New |
| Head Style | T Head, Round Head, Hex Head |
| Shape | Hexagonal, Round |
| Grade | SS 304, 316 L, 316 |
| Type of bolts | Countersunk, Headed, Normal |
| Customized | Yes |
| Thread Type | Yes |
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Stainless Steel |
| Application | Manufacturing |
| Unit Length | 3 m, 6 m |
| Size | >40 mm, 10-20 mm, 350MM, 30-40 mm, 1-10 mm, 20-30 mm |
| Single Piece Length | 6 meter, 3 meter |
| Condition | New |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Unit Pipe Length | Customized, 3 meter, 6 meter |
| Surface Finish | Sand Blasted, Finished Polished, Mill Finished |
| Pipe Fluid | Water, Steam, Chemical |
| Type | Seamless, Welded |
| Condition | New |
| Shape | Square, Round, Rectangular |
| Size | Upto 48 Inch, 3 inch, 2 inch, 1/2 inch, 3/4 inch, 1 inch |
| Material Grade | SS304 |
Manufacturers, Exporters & Supplier of Stainless Steel 304 Seamless Pipe.
ASTM A312 TP 304 / 304L Stainless Steel Welded Pipe Stockist, Supplier & Exporter.
We at M.A.International are importer, exporter and supplier of ASTM A312 Stainless Steel 304 Pipe. These sheet are manufactured using superios quality raw materials for smooth manufacturing of the SS 304L Pipe.
These SS Pipe are exporter to GCC Countries, Europe & African countries.
Also the demand for the these Stainless Steel 304 Pipe is increasing with a rapid pace as the materials has flexible manufacturing capabilities.
Also these Stainless Steel Pipe supplied in standard as well as in cut lengths as per customers requirements.
Our SS 304 Pipe meet all the necessary international accredition, hence they accepted worldwide.
All ASTM A312 Stainless Steel 304L Pipe are dispatched with Mill Test Certificate or Chemical Test Certificate from NABL Approved Laboratory.
We also offer third part inspection from any inspection agency for the TPI of these Stainless Steel Pipe.
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Unit Pipe Length | 3 meter, 6 meter |
| Features | Anealed, Pickled, Polished |
| Pipe Fluid | Water, Gas, Chemical, Slurry, Steam |
| Type | Seamless, Welded |
| Condition | New |
| Size | 3 inch, Upto 48 Inch, 2 inch, 1 inch, 1/2 inch, 3/4 inch |
| Material Grade | SS316L, SS316 |
Manufacturers, Exporters & Supplier of Stainless Steel 316 Seamless Pipe.
ASTM A312 TP 316 / 316L Stainless Steel Welded Pipe Stockist, Supplier & Exporter.
We at M.A.International are importer, exporter and supplier of ASTM A312 Stainless Steel 316 Pipe. These sheet are manufactured using superios quality raw materials for smooth manufacturing of the SS 316L Pipe.
These SS Pipe are exporter to GCC Countries, Europe & African countries.
Also the demand for the these Stainless Steel 316 Pipe is increasing with a rapid pace as the materials has flexible manufacturing capabilities.
Also these Stainless Steel Pipe supplied in standard as well as in cut lengths as per customers requirements.
Our SS 316 Pipe meet all the necessary international accredition, hence they accepted worldwide.
All ASTM A312 Stainless Steel 316L Pipe are dispatched with Mill Test Certificate or Chemical Test Certificate from NABL Approved Laboratory.
We also offer third part inspection from any inspection agency for the TPI of these Stainless Steel Pipe.
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Thickness | 4-5 mm, >5mm, 2-3 mm, 3-4 mm, 0-1 mm, 1-2 mm |
| Steel Grade | SS304 L, SS409 L, SS316 L, SS200 |
| Surface Treatment | Hot Rolled, Cold Rolled |
| Material | Stainless Steel |
| Type | Coil, Plate |
Manufacturers, Exporters & Supplier of Stainless Steel Sheet.
ASTM A240 SS Sheet Stockist, Supplier & Exporter.
We at M.A.International are importer, exporter and supplier of ASTM A240 Stainless Steel Sheet in India . These coils are manufactured using superios quality raw materials for smooth manufacturing of the SS Sheets.
These are exported to GCC Countries, Europe & African countries.
Also the demand for the these Stainless Steel Sheet is increasing with a rapid pace as the materials has flexible manufacturing capabilities.
We offer these stainless steel sheet are available in various size covering almost of the sizes from 1MM to 80MM THK.
Also these Stainless Steel Sheet are supplied in standard as well as in cut lengths as per customers requirements.
Our SS Sheet meet all the necessary international accredition, hence they accepted worldwide.
All ASTM A240 Stainless Steel Sheet are dispatched with Mill Test Certificate or Chemical Test Certificate from NABL Approved Laboratory.
We also offer third part inspection from any inspection agency for the TPI of these Stainless Steel Sheet.
Common Keywords:
Stainless Steel Sheets
SS Sheets
Stainless Hard Sheets / SS Full Hard Sheet
Stainless Steel Half Hard Sheets / SS Half Hard Sheets
Stainless Steel Quarter Hard Sheets / SS Quarter Hard Sheets
Stainless Steel 3/4 Hard Sheet / SS 3/4 Hard Sheets
Stainless Steel Spring Hard Sheet / SS Spring Hard Sheet
Stainless Steel 304 Sheet / SS 304 Sheet
Stainless Steel 304L Sheet / SS 304L Sheet
Stainless Steel 301 Sheet / SS 301 Sheet
Stainless Steel 310 Sheet / SS 310 Sheet
Stainless Steel 309 Sheet / SS 309 Sheet
Stainless Steel 316 Sheet / SS 316 Sheet
Stainless Steel 316L Sheet / SS 316L Sheet
Stainless Steel 317L Sheet / SS 317L Sheet
Stainless Steel 410 Sheet / SS 410 Sheet
Stainless Steel 420 Sheet / SS 420 Sheet
Stainless Steel 430 Sheet / SS 430 Sheet
Stainless Steel BA Finish Sheet / SS BA Finish Sheet
Stainless Steel Matt Finish Sheet / SS Matt Finish Sheet
Stainless Steel No 4 Finish Sheet / SS No 4 Finish Sheet
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Material | Stainless Steel |
| Size | 1-5 inch, 10-20 inch, >30 inch, Upto 72 Inch, 5-10 inch, 20-30 inch, 0-1 inch |
| Material Standard | ASTM A351, ANSI B16.5, ASTM A182, ASTM A105 |
| Condition | New |
| Item | Welding Neck Slip-On Screwed Socket Welding Lap Joint Blind Plate Orifice |
| Flange Facing | Raised Face Flat Face Lapped Joint Face Large Male-Female Small Male-Female Large Tongue & Groove Small Tongue & Groove Ring Joint |
| Standard | 125 Lb, 150 Lb, 300 Lb, 600 Lb, 900 Lb, 1500 Lb, 2500 Lb |
| Stainless Steel Material | ASTM, A-182, F 304, F 304 L, F 310, F 316, F 316 L, F 321, F 347, F 904 L, F310, F317L |
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Steel Grade | SS 304, SS200, SS316 L, SS304 L |
| Standard | AISI, ASTM, DIN |
| Thickness | 4-5 mm, 2-3 mm, 3-4 mm, 0-1 mm, >5 mm, 1-2 mm |
| Surface Treatment | Hot Rolled, Anealed, Cold Rolled |
Manufacturers, Exporters & Supplier of Stainless Steel Plate.
ASTM A240 SS Plate Stockist, Supplier & Exporter.
We at M.A.International are importer, exporter and supplier of ASTM A240 Stainless Steel Plate in India . These coils are manufactured using superior quality raw materials for smooth manufacturing of the SS Plates.
These are exported to GCC Countries, Europe & African countries.
Also the demand for the these Stainless Steel Plate is increasing with a rapid pace as the materials has flexible manufacturing capabilities.
We offer these stainless steel plate are available in various size covering almost of the sizes from 1MM to 80MM THK.
Also these Stainless Steel Plate are supplied in standard as well as in cut lengths as per customers requirements.
Our SS Plate meet all the necessary international accreditation, hence they accepted worldwide.
All ASTM A240 Stainless Steel Plate are dispatched with Mill Test Certificate or Chemical Test Certificate from NABL Approved Laboratory.
We also offer third part inspection from any inspection agency for the TPI of these Stainless Steel Plate.
Common Keywords:
Stainless Steel Plates
SS Plates
Stainless Hard Plates / SS Full Hard Plate
Stainless Steel Half Hard Plates / SS Half Hard Plates
Stainless Steel Quarter Hard Plates / SS Quarter Hard Plates
Stainless Steel 3/4 Hard Plate / SS 3/4 Hard Plates
Stainless Steel Spring Hard Plate / SS Spring Hard Plate
Stainless Steel 304 Plate / SS 304 Plate
Stainless Steel 304L Plate / SS 304L Plate
Stainless Steel 301 Plate / SS 301 Plate
Stainless Steel 310 Plate / SS 310 Plate
Stainless Steel 309 Plate / SS 309 Plate
Stainless Steel 316 Plate / SS 316 Plate
Stainless Steel 316L Plate / SS 316L Plate
Stainless Steel 317L Plate / SS 317L Plate
Stainless Steel 410 Plate / SS 410 Plate
Stainless Steel 420 Plate / SS 420 Plate
Stainless Steel 430 Plate / SS 430 Plate
Stainless Steel BA Finish Plate / SS BA Finish Plate
Stainless Steel Matt Finish Plate / SS Matt Finish Plate
Stainless Steel No 4 Finish Plate / SS No 4 Finish Plate
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Width (mm) | Any |
| Finish | Polished, Unpolished |
| Grade | 200 series, 400 series, 300 series |
| Application | Automobile Industry, Construction, Oil & Gas Industry, Pharmaceutical / Chemical Industry |
Manufacturers, Exporters & Supplier of Stainless Steel Coils.
ASTM A240 SS Coils Sheet Stockist, Supplier & Exporter.
We at M.A.International are importer, exporter and supplier of ASTM A240 Stainless Steel Coils in India . These coils are manufactured using superios quality raw materials for smooth manufacturing of the SS Coils.
These are exported to GCC Countries, Europe & African countries.
Also the demand for the these Stainless Steel Coils is increasing with a rapid pace as the materials has flexible manufacturing capabilities.
We offer these stainless steel plates are available in various size covering almost of the sizes from 1MM to 25MM THK.
Also these Stainless Steel Coils are supplied in standard as well as in cut lengths as per customers requirements.
Our SS Coils meet all the necessary international accredition, hence they accepted worldwide.
All ASTM A240 Stainless Steel Coils are dispatched with Mill Test Certificate or Chemical Test Certificate from NABL Approved Laboratory.
We also offer third part inspection from any inspection agency for the TPI of these Stainless Steel Coils.
Common Keywords:
Stainless Steel Coils
SS Coils
Stainless Hard Coils / SS Full Hard Coil
Stainless Steel Half Hard Coils / SS Half Hard Coils
Stainless Steel Quarter Hard Coils / SS Quarter Hard Coils
Stainless Steel 3/4 Hard Coil / SS 3/4 Hard Coils
Stainless Steel Spring Hard Coil / SS Spring Hard Coil
Stainless Steel 304 Coil / SS 304 Coil
Stainless Steel 304L Coil / SS 304L Coil
Stainless Steel 301 Coil / SS 301 Coil
Stainless Steel 316 Coil / SS 316 Coil
Stainless Steel 316L Coil / SS 316L Coil
Stainless Steel 317L Coil / SS 317L Coil
Stainless Steel 410 Coil / SS 410 Coil
Stainless Steel 420 Coil / SS 420 Coil
Stainless Steel 430 Coil / SS 430 Coil
Stainless Steel BA Finish Coil / SS BA Finish Coil
Stainless Steel Matt Finish Coil / SS Matt Finish Coil
Stainless Steel No 4 Finish Coil / SS No 4 Finish Coil
Additional Information:
Product Details:
| Minimum Order Quantity | 50 Kilogram |
| Wire Material | Stainless Steel |
| Condition | Polished |
| Shape | Round |
| Customized | Yes |
Banking on our vast domain knowledge of manufacturing, supplying, trading, and exporting Coils & Shims we are presenting SS Wires to our prestigious patrons. These are known for remarkable resistance to corrosion and have outstanding mechanical properties. These are used widely for fabrication of storage vessels, and so forth. These are available at reasonable prices.
Features:
High tensile strength
Corrosion proof
Flawless finish
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Kilogram |
| Material | Stainless Steel |
| Product Type | Circles, Metal Circle |
| Application | Pharmaceutical / Chemical Industry, Construction, Automobile Industry, Oil & Gas Industry |
Additional Information:
Product Details:
| Minimum Order Quantity | 500 Piece |
| Size | 1/2 inch, Upto 72, 1 inch, 3/4 inch, 3 inch, 2 inch |
| Application | Pneumatic Connections, Structure Pipe, Chemical Fertilizer Pipe, Hydraulic Pipe, Gas Pipe |
| Material | Stainless Steel |
Manufacturers, Exporters & Supplier of Stainless Steel Outlets Pipe Fittings.
ASTM A182 Stainless Steel Olets Stockist, Supplier & Exporter.
We at M.A.International are importer, exporter and supplier of ASTM A182 Stainless Steel Forged Pipe Fitting . These sheet are manufactured using superios quality raw materials for smooth manufacturing of the SS Outlet Pipe Fitting.
These pipe fittings are exporter to GCC Countries, Europe & African countries.
Also the demand for the these Stainless Steel Outlets Fitting is increasing with a rapid pace as the materials has flexible manufacturing capabilities.
Also these Stainless Steel Olet Fittings supplied in standard as well as in cut lengths as per customers requirements.
Our SS Forged Outlet Pipe Fitting meet all the necessary international accredition, hence they accepted worldwide.
All ASTM A182 Stainless Steel Olet Fitting are dispatched with Mill Test Certificate or Chemical Test Certificate from NABL Approved Laboratory.
We also offer third part inspection from any inspection agency for the TPI of these Stainless Steel Olets Fittings.
Type:
Sockolet
Nipolet
Elbolet
Theradolet
Weldolet
Specifications:
Standard: ASTM / ASME
Additional Information:
Product Details:
| Minimum Order Quantity | 100 Piece |
| Application | Automobile Industry, Oil & Gas Industry, Pharmaceutical / Chemical Industry, Construction |
Additional Information:
Product Details:
| Minimum Order Quantity | 10 Kilogram |
| Application | Pharmaceutical / Chemical Industry, Construction, Automobile Industry, Oil & Gas Industry |
Manufacturers, Exporters & Supplier of Stainless Steel Coils.
ASTM A240 SS Foil Stockist, Supplier & Exporter.
We at M.A.International are importer, exporter and supplier of ASTM A240 Stainless Steel Foils in India . These Foils are manufactured using superios quality raw materials for smooth manufacturing of the SS Coils.
These are exported to GCC Countries, Europe & African countries.
Also the demand for the these Stainless Steel Foils is increasing with a rapid pace as the materials has flexible manufacturing capabilities.
We offer these stainless steel 304 foils are available in various size covering almost of the sizes from 0.01MM to 2MM THK.
Also these Stainless Steel Coils are supplied in standard as well as in cut lengths as per customers requirements.
Our SS Foils meet all the necessary international accredition, hence they accepted worldwide.
All ASTM A240 Stainless Steel Foils are dispatched with Mill Test Certificate or Chemical Test Certificate from NABL Approved Laboratory.
We also offer third part inspection from any inspection agency for the TPI of these Stainless Steel Foils.
Common Keywords:
Stainless Steel Foils / SS Foils
Stainless Hard Foils / SS Full Hard Foil
Stainless Steel Half Hard Foils / SS Half Hard Foils
Stainless Steel Quarter Hard Foils / SS Quarter Hard Foils
Stainless Steel 3/4 Hard Foil / SS 3/4 Hard Foils
Stainless Steel Spring Hard Foil / SS Spring Hard Foil
Stainless Steel 304 Foil / SS 304 Foil
Stainless Steel 304L Foil / SS 304L Foil
Stainless Steel 301 Foil / SS 301 Foil
Stainless Steel 310 Foil / SS 310 Foil
Stainless Steel 316 Foil / SS 316 Foil
Stainless Steel 316L Foil / SS 316L Foil
Stainless Steel 317L Foil / SS 317L Foil
Stainless Steel 410 Foil / SS 410 Foil
Stainless Steel 420 Foil / SS 420 Foil
Stainless Steel 430 Foil / SS 430 Foil
Stainless Steel BA Finish Foil / SS BA Finish Foil
Stainless Steel Matt Finish Foil / SS Matt Finish Foil
Stainless Steel No 4 Finish Foil / SS No 4 Finish Foil
Additional Information:
Product Details:
| Minimum Order Quantity | 10 Number |
| Brand | KSB, Audco, L&T |
| Size | 1/4" to 24" |
Stainless Steel Valve and SS Globe Valve
The stainless steel valve has a large number of variety in it. There are various number of valves like Globe Valve, Gate Valve, Flanged Valve, Double FLanged Valve, Needle Valve etc. These valves are excellent because of the r materials used for manufacturing the valves.
Valves are mostly used in shutoff applications. They are not recommended to be used in a partially open position for a long time under conditions of a high pressure drop across the valve, thus the soft seat could tend to flow through the orifice and block the valve movement.
Additional Information: